descriptions:Air stream drying is also called instantaneous drying.It moves moisture(main moisture of raw materials) quickly from raw materials that are small granule or powder in which the moisture is easy to remove.The quality of finished product can be guaranteed in the best because of the staying time of raw materials in it short.

Our factory follows up closely the advanced technology both at home and abroad and provides complete and qualified and cheap equipment to pharmaceutical,chemical,foodstuff and so on industries.The main products are divided into three series.They are JQ Strengthening Pulse Air Stream Drier,QG Positive or Negative Pressure Pulse Air Stream Drier,FG Positive and Negative Two Grades Air Stream Drier.

characteristic:It is strong in strength and small in volime and large for treating amount and cheap in investment;

High in automatic content,short in drying time(0.5-2 seconds),good qualtiy of products because of the raw materials are treated insinde the pipe.

The complete equipment will be supplied.The basic type consists of air filter,heater,feeder,drying pipe,fan and cyclone separator.The materials may be A3 steel,Aluminum alloy and stainless steel three varieties.Customers can choose the model,material and also may increase dust remover and other auxiliary equipment in accordande with practical needs.

The heat can be selected freely.The output is proportional to the temperature of inlet air.In general,the temperature of inlet air.In general,the temperature of inlet air is 100-300℃and the temperature at outlet is 30-60℃.Choose steam,electric compensating,hot air furnace or hot oil furnace in accordande with practical heat resistant condition of raw materials.

The humidity of feeding material may be 1-60% and the humidity of discharging material will be 0.1-18%.

The amount of evaporated moisture is measured if the primary moisture of maize starch is 40% and the final moisture is 13.5% and the temperature of inlet air is 145℃.It should be ensured for other raw materials in accordance with practical conditions.

principle of work:Air drier can remove moisture from the surface of raw materials of granule or powder that are easy to dehydrate can be controlled to the best state because of raw material can stay here in a short time.The drier of our factory is devloped on the basis of basic type to add a reinforced device of stepless speed exchange.When the humidity raw material is fed through screw,it is mixed with air fully and under the broken and pushing of rotating knives,the surface of raw material is broken to fine granule.It moves onto the outlet at the same time of drying.Finally it enters into drying pipe under the absorbing of air force.At the place it is dried further.The humidity and heavy granule that is not absorbed by air is broken and dried continuously till entering the drying pipe.