Original
By certification 
EOC Master（ONU+EOC）OPE7611
Product Overview
OPE7611 is the integrate EOC Master with one EOC master module and one ONU module.
OPE7611 EOC Master can provide high speed data service based on coaxial cable network. OPE7611 built in a ONU. The module supports IEEE 802.3ah standards. It provide one SC/PC optical EPONuplink port and two 10/100/1000M auto-negotiable Ethernet RJ45 ports. By using the EPON technology, the ONU Module can provide a high-speed data channel through a single optical fiber with a rate of 1.25 Gbit/s on bi-direction. In addition, it offers the QOS, flexible bandwidth allocated to provide quality high-speed data service, voice service, and video service.
The EOC Master Module is based the Qualcomm AR7410 chipset solution，with high anti jamming capability OFDM technology. The 7.5-65MHz low frequency band is used for EOC signals. Built in high isolation filter as CATV RF and EOC signal mixer, the EOC signal and CATV signal in 87~862MHz can run on one cable without interference. The EOC Master can provide high speed data service. The PHY Layer speed is 600Mbps, the MAC Layer throughput is up to 320Mpbs.
The ONU module connects with the EOC module, Ethernet data signals will be modulated into RF signals to transmit in the coaxial cable. OPE7611 integrating EOC and ONU can reduce the number of active node, decreasing failure rate and saving a space. It is the best choice of EPON+EOC solution for the operator.
Function Features
• High integration with two EOC Master modules and one ONU module
• Aluminum alloy die casting shaping, good heat dissipation
• Outdoor waterproof designed, 60V/220V power supply optional
• 7.5-65Mhz frequency for EOC signals., no influence on CATV Service
• Support data encryption
• Support broadcast storm limitation
• Support data packet statistics
• Support auto-update and auto-configuration
• Support Dynamic Bandwidth Allocation (DBA)
• Support ONU auto-discovery/Link detection/remote upgrade of software
• Support Port-based VLAN and IEEE802.1Q VLAN
• Support performance statistics based on ports
• Support ACL achieve the purposes of access control
• Support various LLID configuration and single LLID configuration. Different user and different service could provide different QOS by means of different LLID channels
• EMS network management based on SNMP
Specification
Item |
Parameters |
Specification |
Specification of EOC Module | ||
Interface and LED Indicator |
RF Port |
One TV (CATV Signal) Output, metric F-Female One CABLE (Mixed Signal) Input, metric F-Female |
Ethernet Port |
Two10/100/1000Mauto-negotiation, RJ45 | |
LED Indicator |
1 for Power Supply Status 1 CABLE Link Status indicator 2 for Ethernet Ports Status |
|
Performance Parameters |
RF Parameters |
Frequency Band :7.5-65MHz Receive sensitivity:45dBuv Return Loss:>16dB Output Resistance:75Ω |
Transmission |
PHY Layer:600Mbps Throughput on MAC Layer:320Mbps |
|
Modulation Mode |
OFDM~ 2690~carriers 4096,1024,256,64,16,8~QAM, QPSK, BPSK, ROBO | |
Working Mode |
TDMA/CSMA | |
Encryption Mode |
AES-128 | |
Standard |
EOC Standard |
IEEE P1901(Draft) HomePlug AV |
Ethernet Standard |
IEEE 802.3, IEEE 802.3x, IEEE 802.3u IEEE802.1P, IEEE802.1Q |
|
Software |
Network Management |
WEB, CLI, SNMP |
Software Features |
VLAN, QOS, Bandwidth Control, Broadcast storm limitation | |
Specification of ONU Module | ||
Interface |
PON Interface |
One EPON port Meet 1000BASE-PX20+ standard Up to 1.25Gbps Upstream and Down-stream SC Connector Single-mode fiber, single-strand Maximum split ratio 1:64 Up to 20Km distance @ 1:32 |
Ethernet Interface |
Two 10/100/1000Mauto-negotiation Full/Half-Duplex RJ45 type connector, Auto MDI/MDI-X Up to 100m distance |
|
Performance Parameters |
PON Optical Parameters |
Wavelength: Upsteam1310nm, Downstream 1490nm Transmitter Optical Power: -1～4dBm Optical Receive Sensitivity: -27dBm Saturation Optical Power：-3dBm |
Data Transfer Parameters |
Data Transfer Rate: Upstream 900Mbps；Downstream 950Mbps LAN Interface: 1000Mbps Packet Loss：<1*10E-12 latency：<1.5ms |
|
Business Capability |
Layer 2 wire speed switching Support VLAN TAG/UNTAG，VLANconversion Support Port-based speed limitation Support Priority classification Support storm control of broadcast |
|
Network Management |
Management Mode |
Support IEEE802.3 QAM, ONU can be remotely managed by OLT Support Remote management through SNMP and Telnet Local management |
Function |
Status monitor, Configuration management, Alarm management, Log management | |
Indicator |
Indicator Description |
PWR: Power up or down LOS: Optical Link Status PON：ONU registered LNK: Link Status |
Physical Features | ||
Physical Features |
Power supply & Consumption |
Power Supply：220V/60V optional Consumption：<10W |
Size & Net weight |
Dimension：242×200×101mm Weight：2.2kg |
|
Environment Attribute |
Working Temperature：－10～65℃ Storage Temperature：-40～85℃ Working humidity：10%～85%non-condensing Storage humidity：10%～90% non-condensing |
|
Typical Application
◇ CATV
◇ Internet Access
◇ VOD
◇ IPTV
◇ Camera monitor system
Application Illustration
Figure 1 OPE7611 Application Illustration
