Machine technical parameter:
Side sealer |
BF550G |
Shrink machine |
BSG5030 |
Voltage |
220v 50/60HZ |
Voltage |
380v 50-60HZ |
Power |
1.5KW |
Power |
15KW |
Max height |
250mm |
Tunne size(L*W*H) |
1500x500x300mm |
Sealing size |
Length not limited. Width:550 |
PRODUCT SIZE(W*H) |
400x220mm |
Capacity |
15M/min |
Conveyor Speed |
0-15m/min |
Air pressure |
0.5Mpa |
Material |
Roller chain |
Machine size |
2300x1250x1500mm |
Conveyor Load |
30kg max |
Machine weight: |
450kg |
Machine size (L*W*H) |
1800x880x1100mm |
Application: |
POF.PE, |
Weight |
220kg |
Usage:
Shrink package machine is advanced packaging method at present. It use of shrink film wrapped outside of products, and then be heated , so that the shrink film wrap tightly , the packed products can be sealed, moisture-proof, anti-pollution, and protect products from external impact.
Can be widely used for a variety of small commodity assembly. packaging.
Performance Characteristics
This heated from bottom heat shrink package machine is latest type of automatic shrink packaging equipment ., keep constant temperature inside of tunnel, can makes energy saving and efficient, can be applied to PVC POF and other shrink film packaging
Main technical parameter:
Model |
Voltage |
Power |
Max load |
Tunnel size |
Machine size |
Speed |
Weight |
BSG5030 |
220V/380V |
14KW |
15KG |
1500*500*300 |
1800*880*1100 |
0~15m/min |
290KG |
Control panel:
SOLUTION OF PROBLEMS | ||
FAUTY |
CAUSED |
SOLUTION |
Shrink not nice |
Reverse turn of hot air motor |
Check wires |
Too low temp |
Adjust Temp. |
|
Conveyor too fast |
Adjust speed |
|
Roll chain not run |
Lubricating oil |
|
Temp too high |
adjust |
|
Too noise |
Not smooth |
Lubricating oil |
Heating out of control |
Sensor not connect well. |
Screw loose |
Sensor damaged |
get new one |
|
Conveyor motor Stop running |
Motor switch damaged |
get new one |
Motor burn |
get new one |
|
Fan motor stop running |
Fan switch damage |
get new one |
Fan motor burned |
get new one |
http://www.xy-package.com/